- Patented SIMPLE PUSH IN DESIGN - Quick & Easy effortless push in system. Unlike other bike stands, which you need to lift the bike and put into. Our stand's front holder will tilt when you push the bike into the rack. This patented great design will be PERFECT for heavy bikes such as downhill, mountain and beach bikes.
- MOST STABLE BIKE STAND – There are three points holding on the tires, much better than other stands which have only one or two points holding on the frame, rim, disc rotor and derailleur. The bike's front or rear wheel sitting in the holder is much deeper than others, so it stays firmly in the holdder. Plus a stylish dynamic stand base makes the bike impossible to be tilted if you do not push extremely hard onto the bike.
- FOLDABLE & PORTABLE - A simple one-pull-knob will allow to fold the stand into a flat shape within a second, saving storage when not in use or to carry it into the car when going riding. Your bikes will never be lying on the ground or leaning against buildings or trees anymore.
- SUPERB DURABLE QUALITY & STUNNING FINISH TO MATCH YOUR BIKE - Heat treated high quality steel with a fantastic powder coated finish. This stand will last forever if used appropriately. FITS NEARLY ALL BIKES: The bike stand will fit almost all bikes range from Kids Bikes, 26" to 29" Mountain Bikes, 650c -700c Road Bikes, EXCEPT those bikes with the tires more than 2.4" in width.
- ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide a LIFETIME WARRANTY!
- Fleece Liner - Keep Hands Tosty: Thermal handlebar mittens interior is fleece lining for added warmth while riding in cold winter
- 5MM SBR Material - Waterproof&Windproof: Outerior is 5 mm thick Neoprene(original diving suit material) provides excellent performance on windproof and coldproof - keep your hands warmer, dry and cozy even in the cold weather, rainy, snowy, and windy days
- Reinforced Stitching - More Durable&Better Windproof: 8-Stitching technology was used on our handlebar mitts to achieve it's best performance and durability - highly quality bicycle handlebar mitts by OHOHAI
- Two Large Reflective Pads - Night Safety: Each mountain bike cyclist pogie has two large reflective pads, the OHOHAI logo is also reflective, it will be helpful in night cycling
- Easy to Install - Universal Compatible Pogies: Larger Velcro and premium zipper design to ahieve quickly installation within few minutes on any straight handlebar bikes - 100% tools-free; Large end opening allow you to wear thin/thick hand gloves for added warmth - SERVICE: 60-DAYS no reason refund and our 24-hours customer-friendly service
- LIGHT , STRONG & PORTABLE: The repair stand is made of full light alloy aluminum with heavy duty plastic strong head and clamps. It is light weight, and compact when folded. It is very convenient, durable and well-designed.
- HEIGHT ADJUSTED: Quick Release Adjustable (1m-1.5m or 39"-59" Fully extended). The height, tilt, and angle all have quick release strong skewers. So that is very helpful when wanting to get the bike in the optimal working position for you.
- ROTATED HEAD: Smart design: head rotated:360 Degree by quick release and turning knob. The teeth and clamp are well made and heavy duty. It could hold max. 25 kg or 55 lbs bike at any angle.
- TOOL PLATE: Foldable magnetic tool plate included. Simply attach or remove the tool plate by hand for quick easy set up and storage.
- DURABLE: The bike workstand was released to the market for more than 10 years. It has been approved one of most reliable and durable bicycle repair stands available for home or shop uses. We can offer 5 years warranty on the rack and keep enough parts for any claim in our warehouse.
- MATERIAL:Made of high quality non-slip-rubber for durability, with single aluminum alloy lock-on system
- ERGONOMIC DESIGNED:Ergonomic Designed Handlebar Grips, Extra gel layer for soft touch and comfort with antislip design.
- The high friction rubber provide enough grip in all-weather
- Durable aluminum alloy strengthening clamp lock, keeping the grips tight without any worries of loosing or falling down.
- SIZE: 131mm length, fits for the handle bar of more than 90% of bike with diameter of 0.87in(22.2mm), such as BMX, mountain, MTB, beach cruiser, scooter, folding, downhill, commuter bicycle etc.
- EXCEPTIONAL FIT: Highly absorbent microfiber wiping surface, moisture-wicking, four-way-stretch, breathable mesh upper conforms with your hand for close fit and flex zones at the knuckles that allows the glove to mimic the hand’s natural articulation without bunching or binding and gives more natural feel that enhances comfort and control.
- COMFORT AND SUPPORT: Silicone fingertip print, AX Suede microfiber palm conforms with your hands’ natural shape without excess material or seams and super fit three-panel designed palm allows your hand to move naturally for enhanced control that doesn’t compromise bar feel.
- PROTECTION: 2mm EVA crash pads.
- ATTENTION TO DETAIL: Touchscreen Technology silver fiber in the fingertips allows use of your smart phone and other touchscreen devices.
- 6MM SBR Diving Surface Material: Our Bike handlebar mittens is made of 6mm thick Neoprene surface material, which have excellent windproof and coldproof performance in cold weather. It will keep your hand warm dry and cozy even in the rainy, snowy, and windy days. If it’s a very cold day, you only need to wear a thin gloves inside which would protect your hands warm in all days
- Excellent Windproof & Water-Resistant Performance: ROCKBROS Thermal Handlebar Mittens designed with thick neoprene which is known as a perfect water-resistant material used in making diving suit, so don’t worry it’s great windproof and water-resistant performance. It will protect your hand well in cold weather
- Easy Installation & Securely Fixed：An integrated mitten can be installed or removed without any tools,which make it very easy to install and remove for temperature changes and two velcro and and YKK zipper design make the handlebar mittens can be installed or removed easily.What’s more, Fastener tape to attach it securely and tightly to your bike handlebars without moving and loosing
- Safe Reflective Design: Our winter mittens designed with Reflective design in multiple areas. Each mittens have two reflective pads,front and two sides widened reflective pad.Besides, the ROCKBROS LOGO is also reflective.It will be helpful in night cycling
- Multiple Application: ROCKBROS handlebar mittens are compatible with mountain bikes，E-Bikes, fat bikes, commuter bikes.ROCKBROS promise make the full refund or replacement within 3 months if there is any quality problem about our product. Any problem, please contact us
- 【Comfortable】 Made of TPR rubber material, soft and comfortable, which can increase the shockproof effect and avoid palm and finger paralysis and pain in long-distance riding.
- 【Ergonomic Designed】 Increase contact surface area for hand placement and support the wrist when holding onto the grip, which will minimize the fatigue of your hands. Suitable for long time cycling.
- 【Easy to Install】 Quick and easy installation, just slide the bike handlebar grips onto your bike. NO other tools needed.
- 【Integral Bar Plug】 According to the advise of our customers, we upgraded the handle grip to a integral bar, so you never worry about the end caps falling out. Effectively prevent dust, rain, debris.
- 【Fits Most Handle Bar】 Fits for most handle bar with diameter of 0.87 inches(22.2mm), such as BMX, mountain bikes, MTB, scooter, folding bikes, e-bikes, road bikes, commuter bicycle etc.
- 4-WAY STRETCH, lightweight mesh on the back of the hand
- STRETCH CUFF to easily pull gloves on and off without fumbling for a Velcro strap
- DURABLE, single layer Clarino leather palm for maximum bike feel and no extra material bunching up
- SILICONE PRINTED GRAPHICS on the palms for extra grip so you'll never drop that frosty beverage or muddy handlebars
- HUGE TOWEL MARTERIAL SWEAT CLOTH on the thumb for wiping away sweat, your dirt-stache, or foamy upper lip
- WINDPROOF AND WATER-RESISTANT: Neoprene hand cover protects your hands warm, dry, cozy in rainy, snowy, and windy days.
- Designed for mountain bike/commuter/flat bar bicycles
- SECURELY FIXED: fastener tape to attach it securely and tightly to handlebars without moving and loosing.
- EASY INSTALLATION: An integrated mitten can be installed or removed without any need of tools.
- REFLECTOR: One large-size reflective stripe shines brightly once caught by light at night.