✓ Highlight
- Protects you from mud and water spray.
- Added fork Seal protection from dust, mud and debris.
- Extra front protection without ruining the looks.
- Designed to be aesthetic and functional.
- Special varnish to avoid scratching the graphic.
✓ Highlight
- Applicable Size of Bike Frame - The detachable bicycle mud guard for different diameters of the front bike frame (17mm-34mm). Rear bicycle fenders are applicable for 25.4 mm - 35.6 mm seat posts
- Premium Anti-pressure Material - Our Raymall clip on mountain bike fender is well made of Super Anti-Pressure PVC material, Flexible, Not easily broken and Lightweight
- Wide Range of Use - Clamp on bicycle fenders can be used for (20, 22, 24, 26, 27.5 and 29-inch, 700C) MTB mountain bike, road bike, city bike, touring bike, racing bike wheels, adequately prevents dirt from splashing on your clothes
- Easy to Install & Disassemble - It is very easy to install and remove the rear/front bike splash guard only with a Hex wrench. You can disassemble them anytime and anywhere without a lot of tools. Super easy and convenient
- Adjustable Bike Fender Mud guard - Adjusting different angles of the mud guard mountain bike will let you get the best effect of blocking dirt, and provide comprehensive protection for you and you bike
✓ Highlight
- 【Super Anti- Pressure Material】: well made by Super Anti- Pressure PVC material. Won’t broken and rusted. Super soft, can be randomly bend and beat.
- 【Size Fit】: 2 Front Fender Size: 20+31cm / 7.9+12.2inch. Rear Fender Size: 42cm /16.5 inch. Suitable for most kinds of bikes, like MTB, road bike, city bike and so on. But can't fit the bike which rear pole diameter is smaller than 22mm.
- 【Thicken and Widen】: This bike fender designed with widen-half circle fend design, can effectively prevent the silt splash and away from mud and rainwater to keep dry and clean. These mountain bike fenders are easily washed. The thicken material can prevent any kind of broken in any situation. Enjoy your bike riding in ease. Don’t worry the weather any more.
- 【 3 Pcs Mudguard 】The fender including 3 main parts. Can easily protect your bike away from mud and rainwater. Also more stylish and cool in appearance.
- 【Comes with Allen Wrench】: Using little Allen wrench is easy to install or remove.Please attention:If the product you received missing any components, please contact us to arrange resend them in time.
✓ Highlight
- [Unique Carbon Fiber Grain] It's not a carbon fiber fender, but pressed with carbon fiber pattern. Non-toxic PP engineer plastic material is very lightweight but can be suffer in high temperature,long -lasting exposure and can be folded many times. Also effectively used to block mud and debris from the front of the mountain bike to keep you and your bike clean.
- [Durable and Flexible] Nicedack bike fender is 0.8mm thickness, super tough but flexible enough to get it to fit for most mudguard mountain bike.
- [Difficult to Glide] Four points are fixed to avoid sliding, and the shape is beautiful. More holes than normal bike fenders for easy adjustment and fixing. After fitting the mudguard, make your bike look very cool.
- [Free to Adjust] Different holes can be selected according to the bicycle frames, thus NICEDACK bike fenders can be perfectly fixed on your bicycle (applicable front and rear). Can protect your fork and bridge from agglomeration, reducing the need for cleaning and maintenance.
- [What You Get] 2Pcs* Nicedack MTB Mudguard. Get it Now and approved with our worry-free 12-month warranty and friendly customer service. Buy now, get 10pcs heavy duty cable ties FREELY.
✓ Highlight
- Compatible with bicycle front fork and rear seat,keeping the dirt and water far away from you.
- High quality,engineering plastic material,stone carved 3D carbon fiber 3K twill design,durable,NOT easy to deform.
- Universal for 26",27.5",29" plus size and fat bike wheels sizes.
- Size: 10.39*8.66 inch,lightweight and portable.Easy to install and easy to disassemble.
- One order includes: 2Pcs*bike mudguard,8Pcs heavy duty cable ties.
✓ Highlight
- Universal：Design for all kinds of bike(ebike,MTB).Suitable for 24-29 inch wheels(make sure your front fork has a hole and and the hole diameter 19-35mm),for tyre width from 1.50" to 2.35". No worry for your back wet.
- Simple & Effective - Bike fender can prevent splattering and flying debris from the front wheels, keeping you and your bike clean, available for most bikes.
- Durable & Light-weight : Environmental material tail TPE soft rubber,which has strong elasticity, soft and flexible,UV resistant, increased service life,Good toughness, can twist continuously.
- Compactable for rear rack : No need to worry you can not fit rear rack anymore,give your more options while using the mudguard.
- Quick-release installation:Easy to mount the mudguard.(make sure your front fork has a hole ,seat post is circular tube).Besides,you can adjust the mudguard at any angle according to your requirement.
✓ Highlight
- ✔Fold-resistant: ROCKBROS bike fenders is made of polypropylene, it has good toughness and is not easy to break when twisted. The end of this fender is design with rubber, which is difficult to broken, It can provide effective protection.
- ✔Adjustable: There are two knobs on the rear fender, you can also adjust the angle of the fender as needed. The overall adjustment knob can be adjusted manually, while the mudguard adjustment knob needs to be adjusted with a spanner.
- ✔Quick Installation: Easy to install mudguard, just adjust the angle and tighten the screws. (Make sure your front fork has holes and the seat post is a round tube)
- ✔Effective: The rear of the mudguard is widened and enlarged to effectively block water and prevent rainwater from splashing and staining the rear of the bicycle and clothes.( Suitable for 27.2-34.9mm seat post.)
- ✔30 DAYS MONEY BACK: We promise customers enjoy 30 Day Money Back Guarantee. You can return the fender or get refund in case the purchasing is not satisfactory for any reason.
✓ Highlight
- SOLID AND DURABLE MATERIAL: Made from lightweight polycarbonate which makes the fenders lighter and more solid.
- EASY INSTALLATION: With the zip ties included in the package, you can attach the fenders to the fork, bridge and stanchions.
- HIGH COMPATIBILITY: The mudguards fit 26", 27.5", 29" mountain bikes, suitable for plus size and fat bike wheel sizes.
- SUITABLE FOR FRONT AND REAR WHEELS: Front fork hole diameter for 20.4-28MM between the bike, more than 28MM to be self-adhesive rubber or inner leather, or too much can not be stable and fixed.
- PACKAGE INCLUDES: 2Pcs of large fenders, 2Pcs of small fenders, 10Pcs of zip ties.
✓ Highlight
- Simple and effective, proven protection from front wheel spray and flying debris, keep you and your bike cleaner
- Compatible with Bicycle Front Fork OR Rear Seat (for disc brake use only), it protects your fork stanchions and bridge from getting caked, reducing the need for cleaning and servicing
- Four-point fixed to avoid sliding and easy to form the shape to makes your bike look much cooler after installation
- Super sturdy and light weight, thick enough to be durable but flexible enough to get it to fit your bike
- Easy to install, 1 pc of fender comes with 6 heavy duty zip ties and 1 installation instructions
✓ Highlight
- 【Super Anti- Pressure Material】: well made by Super Anti- Pressure PVC material. Won’t broken and rusted. Super soft, can be randomly bend and beat.
- 【Size Fit】: Suitable for most kinds of bikes, like MTB, road bike, city bike and so on. But can't fit the bike which rear pole diameter is smaller than 22mm.
- 【Thicken and Widen】: This bike fender designed with widen-half circle fend design, can effectively prevent the silt splash and away from mud and rainwater to keep dry and clean. These mountain bike fenders are easily washed. The thicken material can prevent any kind of broken in any situation. Enjoy your bike riding in ease. Don’t worry the weather any more.
- 【 3 Pcs Mudguard 】The fender including 3 main parts. Can easily protect your bike away from mud and rainwater. Also more stylish and cool in appearance.
- 【Comes with Allen Wrench】: Using little Allen wrench is easy to install or remove.Please attention:If the product you received missing any components, please contact us to arrange resend them in time.
